FN® Nano Coatings For The Protection Of Building & Home Exteriors

FN® Coating will protect all the Exterior Walls/Facades against the devastating effects of ultraviolet radiation, mold and algae deposition and stains.

FN® Coating effectively increases the resistance of the facades against the spider webs, pigeon excrement, dust and more. It will ensure the long-term preservation of its clean appearance, thereby limiting the erosive effects of repeated mechanical and chemical cleaning.

FN® Coating Elimanates Harmful Microorganisms

When the sun shines on the surface of the facade, it gets very hot. If the surface gets shade, it quickly cools down. Surfaces have a lower surface temperature than the surrounding area. As a result, dust particles settle on them and condensate the humidity in the air, and due to this, the surfaces are dulled faster by atmospheric impurities and create a favorable environment for the settling of microorganisms. The vulnerability of the facades to soiling, molding and algae is therefore the natural pattern of an aging building.
Solution: FN® Coating protects your facade from damages cause by: algae, mold, dirt and toxic traffic pollution!

High Thermal Stress And UV Rays Accelerate Aging

Rapid temperature changes of the facade surface cause mechanical stress. This over time leads to the creation of micro-cracks that allow water to seep in and thus creating the potential for mold to penetrate into the thermal insulation system. High thermal stress accelerates, coupled with the aggressive effects of ultraviolet (UV) rays, decay of the upper layer of the facade. Furthermore, UV radiation is the main cause of fading color for any facade.
Solution: FN® Coating protects facade ageing, color fading and potentially increasing the value of your property.

Facade Disintegration From Pressurized Water & Chemicals

Facades in large cities and industrial areas are quickly cover with soot, NOx and dirt scattered in the air. In humid climates the facades often suffer the growth of molds and algae. Most solutions to clean and remove dirt from the surface of the facade require a mechanical and/or possibly a chemical action. However, with every cleaning there is wear to the surface layer of the facade, because these methods of cleaning erode the surface layer. And, if the facade is not cleaned for a long time, the dirt penetrates even deeper into the facade layers and the surface can not be cleaned without damage.
Solution: FN® Coating Stops Exterior Fading, is Maintenance Free & Self Cleaning!

Regularly Inspect The Condition Of A Facade

Detected defects (cracks and peeling facade screed) should be repaired without delay. Likewise, it is necessary to repair badly made or damaged drifts, eaves and gutters, from which water flows onto the facade. After repair and cleaning your facade apply FN® Coating to protect the facade and can last over 10 years.

PROTECTION FROM:

FN® Coatings can ensure the long-term preservation of a facade by limiting the erosive effects of repeated mechanical and chemical cleaning. FN® Coatings provide durable protection from:

SUITABLE SURFACES: